• Model NO.：XL-27
• Body Materials：Aluminum
• Light Intensity：≥2700MW,Cm2
• Input Voltage：110-240V, AC.50-60Hz
• Setting Time：2-6 S
• Transport Package：Carton
• Specification：28x17x9cm
• Origin：China
• HS Code：90184990
• Production Capacity：1000units,Month

Basic Info.

Model NO. XL-27 Body Materials Aluminum Light Intensity ≥2700MW/Cm2 Input Voltage 110-240V, AC.50-60Hz Setting Time 2-6 S Transport Package Carton Specification 28x17x9cm Origin China HS Code 90184990 Production Capacity 1000units/Month

Product Description

Dental Equipment 3 Second Curing Light Dental Light Cure

Technical Data
 

Input Voltage	AC 100-240V,50/60Hz
Charger Socket	DC5V
Battery	3500mAH
Wavelength	400 nm-490 nm
Light Density	≥2700mw/ cm²

 

Introduction

LED Curing Light with industrial intelligent chip, digital display and multifunctions, safe operation and perfect self-protection system. It has pure blue visible light and the wavelength is 400-490nm. It can cure all the dental resin in the market nowadays.
 
Charge

Put the curing light into the charger socket, the yellow light is on. When it is done, the green light is on. It takes about 4-6 hours. Remove the adapter from the power supply after charging.
 
Operation Details

Press the ON/OFF button, it is on.
Press the ON/OFF button over 3 seconds, it is off.
When it is on, you can set the TIME(from 2 - 6 seconds), then press the ON/OFF button, it is working; press the ON/OFF button again, it stops.
It will turn off automatically without any operation in a few minutes.
If it buzzs 5 times, it must be charged before using.