| Portal Type Filament Winding Machine |
Equipment No
Item Name | LMFW600-1 | LMFW300-3 | LMFW500-2 |
| Product diameter ,( ID )mm | DN50-DN600 | DN20-DN300 | DN50-DN500 |
| Number of winding shaft,(product number manufactured in one time) | 1 | 3 | 2 |
| Winding angle | 10 º-90 º | 10 º-90 º | 10 º-90 º |
| Product length ,mm | ≤3200 or according to customer's requirements | ≤3200 or according to customer's requirements | ≤3200 or according to customer's requirements |
| Rotating speed of main shaft ,r/min | ≤120 | ≤120 | ≤120 |
| Transmission method | Pinion, rack + linear guide rail | Pinion, rack + linear guide rail | Pinion, rack + linear guide rail |
| Control method | manual,semi automatic,automatic | manual,semi automatic,automatic | manual,semi automatic,automatic |
| Coordinate speed of vehicle,m/min | 60 | 60 | 60 |
| Precision of lining up yarn ,mm | ±0.2 | ±0.2 | ±0.2 |
| Repositioning accuracy ,mm | 0.02 | 0.02 | 0.02 |
| Max speed of pulling yarn ,m/min | 75 | 75 | 75 |
| Max width of yarn tape ,mm | 50 | 50 | 50 |
| Winding type | Reciprocating cross, hoop direction | Reciprocating cross, hoop direction | Reciprocating cross, hoop direction |
| Winding roving capacity,each | 15 | 36 | 30 |
| Resin type | Unsaturated polyester, epoxy resin | Unsaturated polyester, epoxy resin | Unsaturated polyester, epoxy resin |
| Yarn frame(choose one from inner pulling or outer taking) | Tension adjustable yarn frame of mechanical type | Tension adjustable yarn frame of mechanical type | Tension adjustable yarn frame of mechanical type |
| Impregnation groove,(stainless steel) | Roller impregnation with heating system | Roller impregnation with heating system | Roller impregnation with heating system |
| Production capacity ,kg/h | 100 | 150 | 200 |
| Total installed capacity , kw | 9.5( not contain the heating cure station ) | 10.5( not contain the heating cure station ) | 11.5( not contain the heating cure station ) |
| Areas covered by production line(length × width × height)m | 7.5×9×2.5 | 7.5×9×2.5 | 7.5×9×2.5 |
Performance Characteristics:Series portal type filament winding machine of LMFW type is mainly used to produce and manufacture the small pipe of fiber reinforced composite and the tank winding molded products, such as composite insulator, epoxy sleeve, CNG compressed gas cylinder, gas cylinder of respirator, putamina for water treatment, FRP tank for water treatment and etc. This production line is characterized by the high precision of winding line, high productivity, low energy-consuming, easy installation, adjustment and maintenance. It adopts the industrial computer control, so the usage and operation are very convenient.
